Figure 18: Installing The Mag-Rk1U Front Rail - Juniper Junos Pulse MAG2600 Hardware Manual

®
Junos Pulse Gateway Hardware Guide
54

Figure 18: Installing the MAG-RK1U Front Rail

Secure the front rail to the front of the Junos Pulse Gateway using two of the flat-head
4.
6-32 screws.
Attach the rear of the front rail using one of the flat-head M4 screws. You must use
5.
an M4 screw to allow the rear rail to slide smoothly onto the front rail.
Copyright © 2014, Juniper Networks, Inc.