Connecting The Junos Pulse Gateway To The Network; Connecting The Mag-Cm060 Cmc To A Network; Table 25: Port Assignment - Juniper Junos Pulse MAG2600 Hardware Manual

®
Junos Pulse Gateway Hardware Guide

Connecting the Junos Pulse Gateway to the Network

Table 25: Port Assignment

Model
MAG2600
MAG4610
MAG-SM160
MAG-SM360
MAG-SM360-PROFILER

Connecting the MAG-CM060 CMC to a Network

78
Choice:
If you do not see this message, make sure the management console is connected, and
then cycle the power on the Junos Pulse Gateway.
The MAG Series Junos Pulse Gateway has the port assignments described in
Table 25 on page 78.
Port Description
0 Internal
1 External
0 Reserved for management network
1 Internal
2 External
0 Reserved for management network
1 Internal
2 External
0 Reserved for management network
1 Internal
2 External
0 Beacon Endpoint Profiler management and traffic profiling
1 High availability
2 Not used
If you are using Enterprise Guest Access, connect Port 1 (external port) to the guest
network.
The MAG-CM060 has two Ethernet ports:
0 (em0)
1 (em1) - reserved
Copyright © 2014, Juniper Networks, Inc.