®
Junos
Pulse Gateway Hardware Guide
58
Figure 23: Installing the MAG-RK2U Front Rail
Secure the front rail to the front of the Junos Pulse Gateway using two of the flat-head
4.
6-32 screws.
Attach the rear of the front rail using four flat-head M4 screws.
5.
Use the screws on the recessed portion of the front rail. Do not use the holes that
protrude as those are for securing the rear rail.
NOTE:
The second recessed slot appears to require two screws, but
actually requires only one.
Copyright © 2014, Juniper Networks, Inc.