Ricoh FT5535 Service Manual page 389

9. Plug in the copier power cord and turn on the main switch.
10. Press the following sequence of keys to enter SP mode.
→
NOTE: (1) Hold the last
(2) Upon entering SP mode, "1" blinks in the 3rd digit of the copy
counter, the Auto Image Density indicator starts blinking and the
reduce/enlarge indicator turns off.
(3) The above procedure must be finished within 20 seconds.
11. Press the following sequence of keys to change the SP6-101 value to "2".
→
→
12. Turn the main switch off and on.
13. Check the sorter's operation.
A156/A160/A162
CÓPIA NÃO CONTROLADA
→ →
key for more than 3 seconds.
→ →
→
12-8
CÓPIA NÃO CONTROLADA
→ →
FSM