Ricoh FT5535 Service Manual page 643

Symbol Name
LCT Cover-1
SW6
(A214 machine only)
LCT Cover-2
SW7
(A214 machine only)
SW8 Main
Front Cover Safety
SW9
Exit Cover Safety
SW10
(A214 machine only)
Magnetic Clutches
Toner Supply
CL1
CL2 Development
Transfer Belt Contact
CL3
CL4 Registration
By-pass Feed
CL5
CL6 Relay
Upper Paper Feed
CL7
(A212 machine only)
CL8 Lower Paper Feed
Solenoids
A214 machine:
LCT/By-Pass Pick-up
Solenoid
SOL1
A212 machine:
By-pass Pick-up
Solenoid
Junction Gate
SOL2
(A214 machine only)
LCT Pick-up
SOL3
(A214 machine only)
Lamps
Exposure
L1
Main Fusing
L2
SM
CÓPIA NÃO CONTROLADA
Detects whether the LCT cover is open or
not.
Cuts the dc power line of the LCT lift motor.
Supplies power to the copier.
Cuts the ac power line and detects whether
the front door is open or not.
Cuts the ac power line and detects whether
the exit cover is open or not.
Turns the toner supply roller to supply
toner to the development unit.
Drives the development roller.
Controls the touch and release movement
of both the transfer belt unit and the drum
charge roller unit.
Drives the registration rollers.
Starts paper feed from the by-pass feed
table or LCT.
Drives the relay rollers.
Starts paper feed from the upper paper
tray.
Starts paper feed from the lower paper tray.
Picks paper up from the by-pass feed
table. When paper is fed from the LCT, this
solenoid assists SOL3.
Moves the junction gate to direct copies to
the duplex tray or to the paper exit.
Picks up paper from the LCT.
Applies high intensity light to the original for
exposure.
Modified - see the "Optics" section for
details.
Provides heat to the central area of the hot
roller.
Modified - see the "Fusing" section for
details.
5-13
CÓPIA NÃO CONTROLADA
Function Index No.
91
89
37
36
42
66
65
82
67
68
70
74
75
69
79
84
16
59
A212/A214