Ricoh FT5535 Service Manual page 211

3. If side-to side registration is not correct, go through the following steps:
1) Enter SP4-011.
2) Select the required 3rd level program number from the table below
with the
3rd Level Program Number
–001
–002
–003
–004
–005
–006
–007
–008
–009
3) Change the side-to-side registration setting displayed in the
reduce/enlarge indicator. Use the number keys and follow these rules:
If the copy image is shifted to front, increase the setting
If the copy image is shifted to rear, decrease the setting
4) Leave SP mode.
5) Check whether side-to-side registration is correct or not. If it is not,
repeat the above steps from (1) to (4).
A156/A160/A162
CÓPIA NÃO CONTROLADA
and keys.
Non-duplex Machines
1st Tray
2nd Tray
3rd Tray
4th Tray
5th Tray
By-pass
LCT
Base setting made in the factory
ADF
5-64
CÓPIA NÃO CONTROLADA
Duplex Machines
Duplex
1st Tray
2nd Tray
3rd Tray
4th Tray
By-pass
LCT
ADF
FSM