Key Counter Holder (Option) - Ricoh FT5535 Service Manual

2.9 KEY COUNTER HOLDER (OPTION)

[C]
[E]
CAUTION
Unplug the copier power cord before starting the following procedure.
1. Remove the front right cover [A]. (See "Replacement and Adjustment -
Outer Cover Removal".)
2. Remove the cap [B] with nippers.
3. Pass the four-pin connector [C] of the key counter holder [D] through the
opening [E] and couple it with the key counter connector [F].
4. Mount the key counter holder [D] (2 screws).
5. Reinstall all the covers and check the key counter's operation.
6. Make sure that SP mode 5-401 is set to 0, then switch the power off and
cut JP2 on the main board.
FSM
CÓPIA NÃO CONTROLADA
[F]
3-25
CÓPIA NÃO CONTROLADA
[D]
[A]
[B]
A156/A160/A162
Rev. 7/95