Ricoh FT5535 Service Manual page 675

Mode No.
Jogger Span
Adjustment
1-902 (Side Fence) †
Jogger Span
Adjustment
1-905 (End Fence) †
Drum Charge
Voltage
Adjustment
2-001
(for copying) †
Drum Charge
Voltage Display
†
2-002-001
to
2-002-002
Drum Charge
Voltage
Adjustment
2-003
(for making V
patterns) †
Leading/Trailing
Edge Erase
2-101-001
Margin
to
Adjustment †
2-101-002
Development
Bias Adjustment
(for copying) †
2-201-001
SM
CÓPIA NÃO CONTROLADA
Function
Adjusts the stop position of the jogger
side fence span of the duplex unit.
(0.5 mm per step [Range: –8.0 mm to
+8.0 mm])
A214 copier only
Adjusts the stop position of the jogger
end fence span of the duplex unit.
(0.5 mm per step [Range: –8.0 mm to
+8.0 mm])
A214 copier only
Adjusts the voltage applied to the drum
charge roller during copying.
The adjustment factor set with this SP
mode is added to the base voltage.
(30 V per step [Range: Base voltage
–480 V to Base voltage + 480 V])
Displays the voltage applied to the drum
charge roller.
SP2-002-001: For copying
SP2-002-002: For making V
The first three digits are displayed in the
reduce/enlarge indicator. The actual
value is the displayed value x (–10) V.
Just after the main switch is turned on,
the initial setting voltage is displayed.
After one or more copies, the actual
applied voltage (including the process
control corrections) is displayed.
Adjusts the voltage applied to the drum
charge roller when making V
The adjustment factor set with this SP
SP
mode is added to the base voltage.
(10 V per step [Range: Base voltage
–160 V to Base voltage + 160 V])
Adjusts the leading and trailing edge
erase margins.
SP2-101-001: Leading edge erase margin
SP2-101-002: Trailing edge erase margin
(0.5 mm per step [Range: 0.0 mm to
+16.0 mm])
Adjusts the development bias for copying
to make copies lighter or darker in
general.
The adjustment factor set with this SP
mode is applied to the base voltage.
(20 V per step [Range: Base voltage –80
V to Base voltage +80 V])
5-45
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE
Settings
0 ~ 32
Default = 16
0 ~ 32
Default = 16
0 - 32
Default = 16
(0 V) ‡
patterns
SP
0 - 32
patterns. Default = 16
SP
(0 V) ‡
0 - 32
Default = 16
‡ (only 2-101-
001 is on the
data sheet)
1 - 9
Default = 5
(0 V)
1: Darkest
9: Lightest
A212/A214