Scanner Drive Belt Replacement - Ricoh FT5535 Service Manual

2.3 SCANNER DRIVE BELT REPLACEMENT

[I]
[H]
1. Remove the following parts:
•
Platen cover [A] or DF
•
Left scale [B] (2 shoulder
screws)
•
Exposure glass [C]
•
Operation panel [D]
2. Loosen the 4 screws securing the scanner drive motor assembly [H].
3. Remove the main control board bracket (4 screws), and remove the C/B
high voltage supply board assembly [I] (2 screws, 3 connectors and
1 clamp).
4. Loosen the screws securing the belt tension brackets [J] and remove all four
belt tension springs as shown.
A156/A160/A162
CÓPIA NÃO CONTROLADA
[A]
[E]
[G]
[J]
[J]
5-6
CÓPIA NÃO CONTROLADA
[B]
•
Top cover [E]
•
Rear scale [F]
•
Rear cover [G]
•
Upper inner cover
[F]
[C]
[D]
FSM