Ricoh FT5535 Service Manual page 625

DIFFERENCES BETWEEN THE A212/A214 AND A161/A162
The models A212/A214 are based on the A161/A162 series machines. The
models A204/A206/A207/A208/A210/A211 were based on the A153/A156/
A157/A160 series machines and all differences between these two series are
also included in the A212/A214 units.
The following table lists the basic differences between the A212/A214 and
A161/A162 series machines. Also listed are differences between the A212/A214
and the 204/A206/A207/A208/A210/A211 series, and the pages to refer to in
your service manual.
No. (Section to refer to in
the Service Manual)
Specifications
1 Power Consumption
2 Noise Emissions:
3 Dimensions
4 Paper Capacity
Process Control
1 Temperature
Correction
(formally known as the
T/H correction)
SM
CÓPIA NÃO CONTROLADA
(A153/A156/A157/
A160/A161/A162)
Power consumption for all
models is listed.
Pg. 1-2
Noise measured per ISO 7779.
Pg. 1-2
Dimensions listed are for A153/
A156/A157/ A160/A161/A162
models.
Pg. 1-3
250 sheets per tray
Pg. 1-4
Both the temperature and the
drum rotation time are monitored
to apply corrections to the drum
charge roller during copying and
when making an ID sensor
pattern. Pg. 2-24
1
CÓPIA NÃO CONTROLADA
(A212/A214)
Power consumption for the new
A212/A214 copiers is higher at
maximum output and lower at
other modes than the prior
models.
Pg. 5-2
Noise levels at each stated
measurement are lower for the
22 cpm models.
Pg. 5-2
The A212/A214 are similar to
the prior A161/A162 models in
all dimensions except height.
Pg. 5-3
500 sheets per tray
Pg. 5-3
At low temperatures, this new
drum charge roller's charge
efficiency does not decrease,
and it is the same level as for
the base copier at normal
temperatures. This is why the
drum rotation time correction is
longer necessary, as this
correction was applied only at
low temperatures.
Pg. 5-16
A212/A214