Sp5-804 Electrical Component Output Check - Ricoh FT5535 Service Manual

Rev. 7/95

2.6 SP5-804 ELECTRICAL COMPONENT OUTPUT CHECK

1. Access SP5-804 (refer to section 2.1).
2. Select the required 3rd level program number using the
keys. See below for a list of which 3rd level number to use for
each component.
3. Press the Start key to turn on the electrical component.
4. Press the Clear/Stop key to turn off the electrical component.
5. To turn on another electrical component, repeat from step 2.
CAUTION: The motors keep turning in this output mode regardless
of inputs from sensors. To prevent mechanical or
electrical damage, do not keep the electrical component
on for a long time.
3rd level No.
1 Main motor
2 Relay clutch
3 Registration clutch
4 Transfer belt contact clutch
5 Junction gate SOL
6 Not used
7 Sorter drive motor (A556 and A557 sorters only)
8 By-pass feed CL
9 By-pass feed pick-up SOL
10 Upper paper feed CL
11 Upper tray separation SOL
12 Upper tray pick up SOL
13 Upper tray lift motor (up)
14 Upper tray lift motor (down)
15 Lower paper feed CL
16 Lower tray separation SOL
17 Lower tray pick-up SOL
18 Lower tray lift motor (up)
19 Lower tray lift motor (down)
20 LCT pick-up SOL (LCT Equipped Units Only)
21 Not used
22 Not used
23 LCT display
24 Bin drive motor up
25 Bin drive motor down
A156/A160/A162
CÓPIA NÃO CONTROLADA
Electrical Component
4-46
CÓPIA NÃO CONTROLADA
and
FSM