Ricoh FT5535 Service Manual page 508

SERVICE PROGRAM MODE
Mode No.
Paper Size Set
•
°5-019-001
†
to
5-019-008
Duplex Priority
Selection
(Energy Star) †
•
°5-021
Energy Star
Selection †
°5-022
Auto Reset
Time Setting †
•
°5-101
Auto Energy
Saver Time
Setting †
•
°5-102
Auto Tray Shift
•
°5-103
†
A3/DLT Double
Count †
°5-104
Image Density
Level
Correction
•
°5-106
(ADS
Correction) †
A207/A208/A211
CÓPIA NÃO CONTROLADA
Function
Sets the paper size for each paper tray
and feed station.
Specifies whether the copier defaults to
duplex or single sided copies mode.
Specifies whether the copier performs
the modes which are related to the
Energy Star Standardization.
The following SP modes are changed
automatically when this setting is
changed.
•
SP1-105-002
•
SP5-021
•
SP5-102
•
SP5-305-001
•
SP5-305-002
Inputs the auto reset time after the copier
enters standby, or disables auto reset.
(1 second per step [Range: 1 ~ 999])
If "0" is selected, auto reset is disabled.
Sets the time that the machine enters
energy saver mode after entering the
ready condition.
(1 minute per step)
If "0" is selected, the energy saver mode
is disabled (except for NA version).
Selects whether auto tray shift is on or
off.
Specifies whether the counter is doubled
for A3/DLT paper.
If "ON" is selected, the total counter and
the current user code counter counts up
twice when A3/DLT copy paper is used.
Selects the image density level
correction.
The development bias voltage correction
in ADS mode depends on this setting
(see "ADS Correction" in the Process
Control section for details).
1-76
CÓPIA NÃO CONTROLADA
Settings
For how to
input the
settings, see
section 2.7.
1: Duplex
2: Single side
Default = 1
(NA)
Default = 2
(Others)
0: NO
1: YES
Default = 1
(NA)
Default = 0
(Others)
0 ~ 999
Default = 60
NA version
1 ~ 120
Default = 15
Other versions
0 ~ 120
Default = 1
0: OFF
1: ON
0: OFF
1: ON
0: Darkest
1: Darker
2: Normal
3: Lighter
4: Lightest
SM