Ricoh FT5535 Service Manual page 610

BASIC OPERATION
3.5 JOGGER MECHANISM
[C]
The jogger motor [A] drives the jogger plate [B] through the timing belts [C].
The jogger is at home position when the actuator on the jogger plate goes
into the jogger home position sensor [D].
At standby, the jogger plate is at the home position. When the
pressed, the copier sends the paper size information to the sorter stapler.
In sort, staple, and stack modes, the jogger moves three times to square the
stack of paper. First, when the paper has been fed completely into the bin (at
the proper time after the copy has passed through the entrance sensor [E],
depending on the paper length), the jogger motor moves the jogger plate out
of the jogger home position. Then, the jogger motor drives the jogger plate to
the width of the copy. Finally, the jogger plate moves inward to push all the
copies against the front side frame, which squares the sheets of paper. Then
the jogger plate returns to the home position.
A207/A208/A211
CÓPIA NÃO CONTROLADA
[D]
4-10
CÓPIA NÃO CONTROLADA
[B]
[E]
[A]
A658D506.wmf
key is
SM