Ricoh FT5535 Service Manual page 341

Rev. 7/95
5. SERVICE TABLES (MAIN BOARD)
5.1 DIP SWITCHES
DIP SW 100 - Combinations other than those below are used only at the
factory.
1 2 3
0 0 0
1 0
1
0 1
1 1
0 0 0
To make a free run
1. Select the required free run mode with switches 2 and 3.
2. Set switch 1 to 1. The free run starts.
3. To end the free run, set switch 1 to 0, then set switches 2 and 3 back to
0.
Remarks
#1 The roller drive motor turns on (alternately at low and high
speed).
The sorting operation is repeated from the 1st bin to the 20th bin.
Operated components:
#2 Stapling is repeated from the 1st bin to the 20th bin. (If there are
staples in the staple unit, the stapling operation is skipped. If
there is paper in the bins, the jogger motor does not turn on.)
Operated components:
#3 #1 and #2 are repeated together alternately.
5.2 LED AND VARIABLE RESISTOR
LED No.
100
5.3 TEST POINTS
Number
TP100
TP101
TP102
A156/A160/A162
CÓPIA NÃO CONTROLADA
4 5
0 0 Normal Machine Operation
0 0 Sorter Free Run
0 0 Stapler Free Run
0 0 Sorter & Stapler Free Run
0 1 Bin Sensor Adjustment (see section 6.6.2)
•
•
•
•
•
•
•
VR No.
100 Adjusts bin sensor sensitivity
Function
GND
+24V
+5V
10-14
CÓPIA NÃO CONTROLADA
Function
Turn gate solenoid
Bin lift motor
Jogger motor (for A4 sideways)
Bin lift motor
Grip motor
Stapler motor
Jogger motor (for A4 sideways)
Function
Remarks
#1
#2
#3
FSM