20-Bin Sorter Stapler (A658) Installation Procedure - Ricoh FT5535 Service Manual

INSTALLATION
11.8 20-BIN SORTER STAPLER (A658) INSTALLATION
PROCEDURE
[A]
[D] [B]
CAUTION
Unplug the copier power cord before starting the following procedure.
When handling the sorter stapler, make sure to hold the parts shown
[A]. Otherwise, the resulting damage may cause paper jams at the
entrance.
NOTE: 1) Keep the shipping retainers after installing the machine. They will
be reused if the machine will be transported to another location.
2) Proper reinstallation of the shipping retainers is required in order
to avoid any transport damage.
3) A sorter adapter (A568) is required to install this sorter stapler in
the A208/A210/A211 copiers. Before installing this sorter stapler,
please install the sorter adapter.
1. Remove the strips of tape and the shipping retainers as shown.
2. Open the front door [B] and remove the cardboard [C] and the strip of
tape [D] from the staple unit. Close the front door.
A207/A208/A211
CÓPIA NÃO CONTROLADA
A658I500.wmf
[C]
A658I508.wmf
1-56
CÓPIA NÃO CONTROLADA
A658I501.wmf
SM