Ricoh FT5535 Service Manual page 514

SERVICE PROGRAM MODE
Mode No.
DF Free Run
with Paper
6-009
Auto APS
Select (DF) †
•
°6-010
Thick/Thin
•
°6-011 Original Mode
Selection †
Sorter
Installation †
°6-101
Sorter Stack
Limit †
°6-102
A207/A208/A211
CÓPIA NÃO CONTROLADA
Function
!
To start the DF free run, put some
$
sheets of paper on the ARDF then press
the key. Stop the free run by
pressing key.
This is a general free run controlled from
the copier. For more detailed free run
modes, see the manual for the DF.
Selects whether auto APS mode is used
with the DF or not.
If "ON" is selected, APS mode is
selected automatically when an original
is placed on the DF. This SP mode is in
effect only when the APS priority
(SP5-003) is set to Manual.
Selects the original feed type for the DF.
In thin mode, originals will not be pushed
back against the left scale.
Use this to specify which sorter is
installed.
After setting this SP mode, the copier
main switch must be turned off and on.
For the A555, A658 and A664 sorter
stapler, the setting does not have to be
changed (keep it at 0).
Select which sorter stack limit to use.
OFF: Sorting and stacking can be done until the sorter tray
cannot take any more paper. Then copying stops and
the R indicator lights.
ON: Sorting and stacking can be done until the following
limit is reached. Then copying stops and the R
indicator lights.
A664 Sorter/Stapler
Sort or Stack Mode: 50
A658 Sorter/Stapler
Sort Mode: 30 (A4/LT), 25 (B4/LG, A3/DLT)
Stack Mode: 25 (A4/LT, 20 (B4/LG, A3/DLT)
A555 Sorter/Stapler
Sort Mode: 30 (A4/LT), 25 (B4/LG, A3/DLT)
Stack Mode: 25 (A4/LT), 20 (B4/LG, A3/DLT)
A556 Sorter
Sort Mode: 30 (A4/LT), 15 (B4/LG), 10 (A3/DLT)
Stack Mode: 30 (A4/LT), 10 (B4/LG, A3/DLT)
A557 Sorter
Sort or Stack Mode: 20 (A4/LT), 15 (B4/LG), 10 (A3/DLT)
1-82
CÓPIA NÃO CONTROLADA
Settings
0: OFF
1: ON
0: Thick mode
1: Thin mode
0: No sorter
1: A557 sorter
2: A556 sorter
3: Not used
4: A568 sorter
adapter only
0: OFF
1: ON
SM