Ricoh FT5535 Service Manual page 476

INSTALLATION
[B]
19. Swing in the bottle holder assembly [A] so that the toner bottle holder [B]
and the slide rail [C] are aligned straight.
IMPORTANT: Do not swing the bottle holder fully into the machine before
doing step 20.
20. Slide the bottle holder assembly in as described below:
1) Slide the bottle holder assembly into its lock position while pressing
down the bottle holder lock lever [D].
2) When the bottle holder assembly reaches its lock position, push up the
bottle holder lock lever so that the knob screw holes are aligned.
3) Secure the bottle holder lock lever with the knob screw.
CAUTION
Do not swing the bottle holder assembly all the way into its original
position in the machine without sliding and locking it into position
exactly as described above. Otherwise, the assembly will be damaged.
21. Install a toner bottle by following the instructions placed on the reverse
side of the front cover.
22. Swing in the toner bottle holder to its original position and close the front
cover.
23. Plug in the copier and turn on the main switch.
A207/A208/A211
CÓPIA NÃO CONTROLADA
1-44
CÓPIA NÃO CONTROLADA
[A]
[C]
[D]
A204I512.wmf
SM