Ricoh FT5535 Service Manual page 318

3.3 TRAY HEATER (OPTION)
[D]
[B]
1. Remove the rear cover [A].
2. Remove the second paper tray [B] (2 screws) and the lower front cover
[C] (2 screws).
3. Install the tray heaters [D] (2 screws each).
4. Install the clamper [E] and clamp the heater harnesses.
5. Install the heater bracket [F] (2 screws).
6. Connect the heater harnesses.
7. Install the clamper [G] and clamp the heater harnesses.
NOTE: After replacing the paper tray, perform the side-to-side registration
adjustment (see the Removal and Adjustment section of the manual
for the copier).
FSM
CÓPIA NÃO CONTROLADA
[A]
[F]
[C]
9-7
CÓPIA NÃO CONTROLADA
[E]
[G]
A156/A160/A162