Ricoh FT5535 Service Manual page 687

Mode No.
User Code
Number Clear †
•
°5-407-001
to
5-407-002
Number of
Registered
°5-408
User Codes
Display †
User Code
Reset Time
•
° 5-410
Setting †
PM Interval
°5-501-001
Setting †
PM Interval
Setting
(PM Alarm
°5-501-002
Mode Setting) †
RDS/CSS Alarm Level for Paper Jam (Paper Jam Alarm Level Setting) †
5-504
Used in Japan only. Do not change the factory setting.
RDS/CSS Alarm Level for SC (Service Call Alarm Level Setting) †
5-505
Used in Japan only. Do not change the factory setting.
RDS/CSS Alarm Level for Supplies (Supply Alarm Mode Setting) †
°5-507
Used in Japan only. Do not change the factory setting.
Memory All
Clear †
5-801
SM
CÓPIA NÃO CONTROLADA
Function
Deletes user code numbers.
SP5-404-001: Deletes individual user
code numbers. Enter the
%
required user code at the
numeric keys, then press
the
user codes are being used,
use SP5-405.)
SP5-404-002: Deletes all the user code
numbers.
Displays the number of registered user
codes in the reduce/enlarge indicator.
Selects the user code reset time in
one-second steps. This is the time that
the current user code remains active
after the end of the copy job.
Sets the PM interval.
(1,000 copies per step [Range: 1 to 999])
Specifies whether PM alarm mode is on
or off.
If PM alarm mode is on, the manual ID
level/ADS indicator and copy counter
blink when the PM counter reaches the
PM interval.
Resets all the correction data for process
control and all software counters, and
returns all modes and adjustments to the
default settings.
See Service Tables - section 2.2.4 for
how to perform this SP mode.
Normally, this SP mode should not be
performed.
This SP mode is required only when
replacing the RAM board, or when the
copier malfunctions due to a damaged
RAM board.
5-57
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE
Settings
key. (To see which
1 ~ 999
Default = 60
1 ~ 999
Default = 100
0: OFF
1: ON
A212/A214