Ricoh FT5535 Service Manual page 357

Component
(Symbol)
Bin-LED
(S5)
140-4
Bin-Photo.
Tr (S6)
≥ 4.0 V
155-3
≤ 1.0 V
Grip H.P.
(S7)
≥ 4.0 V
115-2
≤ 1.0 V
Bin H.P.
(S8)
≥ 4.0 V
130-11
≤ 1.0 V
Bin Exit (S9)
≥ 4.0 V
150-4
≤ 1.0 V
A156/A160/A162
CÓPIA NÃO CONTROLADA
CN Condition
At main sw power-up
Open The Sorter Jam indicator starts blinking when
(stays sort/stack or staple mode is selected.
Low)
Shorted
(stays
High)
Open
(stays
High)
Shorted The Sorter Misfeed Location indicator starts
(stays blinking when sort/stack or staple mode is
Low) selected.
Open The Sorter Jam
(stays indicator starts blinking.
High)
Shorted The grip motor keeps
(stays rotating until the Sorter
Low) Jam indicator starts
blinking.
Open
(stays
High)
Shorted The Sorter Jam
(stays indicator starts blinking.
Low)
Open
(stays
High)
Shorted The Sorter Jam
(stays indicator starts blinking.
Low)
10-30
CÓPIA NÃO CONTROLADA
Symptom
Ready condition
–
Stapling does not occur
even though copying
–
has been completed in
staple mode.
The Sorter Jam
indicator starts blinking
when copies are made
in sort/stack or staple
mode.
After the sorter stapler
or front door is
opened/closed, "SC
code (723)" will be
displayed.
The Sorter Jam
indicator starts blinking
when copies are made
in sort/stack or staple
mode.
After the sorter stapler
or front door is
opened/closed, "SC
code (723)" will be
displayed.
–
The Sorter Jam
– indicator starts blinking
when copies are made
in sort/stack or staple
mode.
–
–
–
FSM