Ricoh FT5535 Service Manual page 390

6. REPLACEMENT AND ADJUSTMENT
6.1 EXIT ROLLER AND RUBBER BELT REPLACEMENT
[A]
[C]
1. Remove the sorter from the copier.
2. Remove the front cover (2 screws).
3. Remove the rear cover (4 screws).
4. Swing the guide plate [A] up, then remove it carefully from the snaps on
both sides by pulling it up.
5. Remove the inner cover [B] (4 screws).
6. Unhook the front [C] and rear [D] pressure springs.
FSM
CÓPIA NÃO CONTROLADA
[D]
12-9
CÓPIA NÃO CONTROLADA
[A]
A156/A160/A162
[B]