Drum Drive Belt Replacement - Ricoh PRIPORT VT 2000 Series Service Manual

28 February '91

9.15 DRUM DRIVE BELT REPLACEMENT

Removal:
1. Set the image position to "0" by turning off and on the main switch.
2. Turn off the main switch and unplug the power supply cord.
3. Remove the drum unit.
4. Remove the rear cover.
5. Remove the center support side plate [A] (5 screws).
6. Remove the lower support side plate [B] (4 screws).
7. Remove the upper support side plate [C] (6 screws).
[C]
[B]
5-74
[A]