Setting The Custom Paper Size Values - Ricoh DDP184 User Manual

Setting the Custom Paper Size Values

If the paper size you have selected is a custom size you must set the paper size using
the OCP. First, follow the steps for loading paper into the desired tray, then perform
these steps
1. On the Custom Paper Size screen, touch the value box for the leading edge (the
arrow in the illustration points to the leading edge).
Paper Width
(Leading Edge)
The Custom Paper Size Input screen is displayed.
2. Using the number pad, enter the value for the leading edge of the paper.
3. Press enter (
entered is shown.
4. Touch the value box for the side edge. The display returns to Custom Paper Size
Input.
5. Using the number pad, enter the value for the side edge of the paper.
6. Press enter (
you have entered are displayed.
7. Press enter (
3-20 Paper Handling
). The display returns to Custom Paper Size and the value you have
). The display returns to Custom Paper Size and now both values
). Your custom paper size settings are now saved.
OG L 0 0
Paper Length
(Side Edge)
Paper Feed Direction
Previous Menu