Working Instruction, Mechanical
3.5 Dome Foil Assembly
Perform the disassembly procedure from section 2.1.1 - 2.1.4
Obtain a new dome foil assembly.
Perform the reassembly procedure from section 4.1.3 - 4.1.6
3.6 LCD Assembly
Perform sections 2.1.1-2.1.4 of the disassembly procedure.
Using a nylon pointer, rotate the black bar portion of the ZIF
connector toward the circuit board.
Use the nylon pointer to push the LCD flex film out of its
connector toward the LCD.
Insert one of the corners of the plectrum into the seam
along one side of the LCD in the location shown.
3/000 21-1/FEA 209 544/123 A
21(61)
©
Sony Ericsson Mobile Communications AB