External Kp; Nmea2000 - Furuno SFD-1010 Operator's Manual

5.8.5

External KP

The [External KP] menu enables, disables use of an external KP. Normally, the
internal KP is used. Set to [On] when using an external KP.
Touch control:
1. Press the MENU/ESC key to open [MENU].
2. Tap [SYSTEM].
3. Tap [External KP]. [Off]/[On] selection box appears.
4. Tap [Off] or [On].
5. Tap [×] on title bar to close [MENU].
Key control:
1. Press the MENU/ESC key to open [MENU].
2. Select [SYSTEM] with the arrow keys, then press the ENTER key.
3. Select [External KP] with the arrow keys, then press the ENTER key.
[Off]/[On] selection box appears.
4. Select [Off] or [On] with the arrow keys, then press the ENTER key.
5. Press the MENU/ESC key to close [MENU].
5.8.6

NMEA2000

Set the following items related to NMEA2000.
Touch control:
1. Press the MENU/ESC key to open [MENU].
2. Tap [SYSTEM].
3. Tap [NMEA2000 PGN Output].
Related menu appears.
Key control:
1. Press the MENU/ESC key to open [MENU].
2. Select [SYSTEM] with the arrow keys, then press the ENTER key.
3. Select [NMEA2000 PGN Output], then press the ENTER key.
Related menu appears.
•
•
•
•
•
•
Turn output of each PGN/sentence on or off as appropriate.
128259 : Speed, Water referenced
128267 : Water Depth
130310 : Environmental Parameters
130312 : Temperature
130316 : Temperature, Extended Range
130830 : Target Information
5. INSTALLATION
5-29