How To Display Tt Data; Past Position Display - Furuno SFD-1010 Operator's Manual

2.24.8

How to display TT data

Data on tracked targets (bearing, course, range, speed, CPA, TCPA) are displayed in
the data box on the right side of the screen. Set the [TT DISPLAY] menu in the [TT]
menu to [On] to show the data.
1. Tap a TT target whose information you want to view.
2. The [+] cursor moves onto the TT symbol.
[TT DATA BOX] shows the TT information for the TT currently selected.
When a TT is deleted, the [TT DATA BOX] information is also deleted.
2.24.9

Past position display

The past position display shows equally time-spaced dots marking the past positions
of any targets being tracked.
A new dot is added every minute (or at other preset time intervals) until the preset
number is reached. If a target changes its speed, the spacing will be uneven. If it
changes the course, its plotted course will not be a straight line.
How to set the number of tracks points to show
Touch control:
1. Press the MENU/ESC key to open [MENU].
2. Tap [TT].
3. Tap [Past Positions].
The [Off]/[5]/[10] selection box appears.
4. Tap [Off], [5] or [10].
5. Tap [x] on the title bar to close [MENU].
Key control:
1. Press the MENU/ESC key to open [MENU].
2. Select [TT] with the arrow keys, then press the ENTER key.
2. RADAR
2-45