5. INSTALLATION
Touch control:
1. Press the MENU/ESC key to open [MENU].
2. Tap [SYSTEM].
3. Tap [Motion Sensor Setup].
Related menus appear.
Key control:
1. Press the MENU/ESC key to open [MENU].
2. Select [SYSTEM] with arrow keys, then press ENTER key.
3. Select [Motion Sensor Setup], then press ENTER key.
Related menus appear.
5.9.4
[External KP] menu
The [External KP] menu enables, disables use of an external KP. Normally, the
internal KP is used. Set to [On] when using an external KP.
Touch control:
1.
Press the MENU/ESC key to open [MENU].
2. Tap [SYSTEM].
3. Tap [External KP]. [Off]/[On] selection box appears.
4. Tap [Off] or [On].
5. Tap [×] on title bar to close [MENU].
Key control:
1.
Press the MENU/ESC key to open [MENU].
2. Select [SYSTEM] with the arrow keys, then press the ENTER key.
3. Select [External KP] with the arrow keys, then press the ENTER key.
[Off]/[On] selection box appears.
4. Select [Off] or [On] with the arrow keys, then press the ENTER key.
Press the MENU/ESC key to close [MENU].
5-32