Wiring; Wiring External Equipment - Furuno MU-150C Operator's Manual

Furuno multi-purpose lcd display operator's manual mu-150c

Table of Contents

2 WIRING

Connect external equipment to the MU-150C by referring to the drawings in this section. A

cable with connector at both ends is provided to connect equipment.

General-purpose monitor

To use the MU-150C as a general-purpose monitor, connect equipment with a mini D-SUB

15P connector. In this case do not connect a navigator to the NMEA port. Nav data is output

through the D-SUB 25P connector.

Display unit, rear view, wiring using general-purpose cables

Note: When connecting a general-purpose monitor, use the following cable or the

equivalent:

Mini D-sub 15P: EVNPS05-50 ft, male-male, (max. 15 m)

Manufacturer:

BlackBox Japan

Table of Contents