How To Show The Own Ship Mark - Furuno SFD-1010 Operator's Manual

5.7.4

How to show the own ship mark

The own ship mark can be displayed on the screen.
Touch control:
1. Press the MENU/ESC key to open [MENU].
2. Tap [MARK TEXT].
3. Tap [OS MARK].
The [On]/[Off] selection box appears.
4. Tap [On] or [Off].
5. Tap [x] on the title bar to close [MENU].
Key control:
1. Press the MENU/ESC key to open [MENU].
2. Select [MARK TEXT] with the arrow keys, then press the ENTER key.
3. Select [OS MARK] with the arrow keys, then press the ENTER key.
The [On]/[Off] selection box appears.
4. Select [On] or [Off] with the arrow keys, then press the ENTER key.
5. Press the MENU/ESC key to close [MENU].
How to show the own ship mark in scale
The own ship mark can be displayed in true scale by entering your ship's length and
width.
Touch control:
1. Press the MENU/ESC key to open [MENU].
2. Tap [MARK TEXT].
3. Tap [OS Length] or [OS Beam].
The cursor moves to the slider bar on the right side of the menu.
4. Drag the slider bar or tap [+] or [-] to set the own ship's length and width.
5. Tap [x] on the title bar to close [MENU].
Key control:
1. Press the MENU/ESC key to open [MENU].
2. Select [MARK TEXT] with the arrow keys, then press the ENTER key.
3. Select [OS Length] or [OS Beam] with the arrow keys, then press the ENTER key.
The cursor moves to the slider bar on the right side of the menu.
4. Set the own ship's length and width with the arrow keys, then press the ENTER key.
5. INSTALLATION
5-21