Table of Contents
Advertisement
2. RADAR
2.
Select the [ECHO ADJUST] menu with the arrow keys, then press the ENTER key.
3.
Select [Int Rejector] with the arrow keys, then press the ENTER key.
The [Off]/[On] selection box appears.
4.
Select [On] with the arrow keys, then press the ENTER key.
5.
Press the MENU/ESC key to close [MENU].
2.10 Noise Rejection
Numerous white speckles (white noise) appearing on the screen can be rejected with
the following procedure. Noise rejection can be set in two ways.
Using the [ADJUST] menu for noise rejection
Touch control:
1.
Press the ADJUST key to open the [ADJUST] menu.
2.
Tap the [Noise Rejector] menu to open the [Off]/[On] selection box.
3.
Tap [On].
4.
Tap [x] on the title bar to close the [ADJUST] menu.
Key control:
1.
Press the ADJUST key to open the [ADJUST] menu.
2.
Select [Noise Rejector] with the arrow keys, then press the ENTER key.
The [Off]/[On] selection box appears.
3.
Select [On] with the arrow keys, then press the ENTER key.
4.
Press the MENU/ESC key to close [ADJUST].
2-16
2-17
2-17
Advertisement
Table of Contents
Troubleshooting
