Importing Waypoint From External Device (Gp-80 Or Gp-90) - Furuno FEA-2107 Operator's Manual

13.5.8

Importing waypoint from external device (GP-80 or GP-90)

You are able to import waypoints from other External Device, like FURUNO GP-80 or GP-90 GPS Navigator to
current route. To import waypoints do the following:
1. Place the cursor on Route in the status bar and then click Plan to open the Plan Route dialog box. Click the WP
tab to open the WP page. Check Enable changes.
2. Click the Import button. The following dialog box appears.
Enter where to import waypoints. To enter them after a WP in a route, enter waypoint number in the "Copy
after wp" box (if applicable). If you want to enter them before a WP in the route where WPs will be imported
enter waypoint number in the "Copy before wp" box.
Spin the thumbwheel to choose desired number and then push the thumbwheel.
3. Press the Copy from ext. device button.
When text "Import from ext. device: Waiting messages" appears, you can start importing WPs from a GPS
Navigator.
When WPs are imported, you can monitor progress of it as it is shown picture above.
When it is ready you will have "Transfer ready" message as shown picture above.
4. Click the Done button.
5. When finished, click X at top right corner of the dialog box to close the dialog box.
13. Route Planning
13-13