How To Use Terrain Shading - Furuno SFD-1010 Operator's Manual

4. MULTI BEAM SONAR DFF-3D
4.6.7

How to use terrain shading

The thickness of the bottom terrain shading can be adjusted.
Touch control:
1. Press the MENU/ESC key to open [Menu].
2. Tap [3D HIST.].
3. Tap [Terrain Shad.]. Drag the slider bar which appears below menu or tap [+] or
[-] to adjust the value. (Setting range: 0 to 100)
4. Tap [×] on the title bar to close [MENU].
Key control:
1. Press the MENU/ESC key to open [Menu].
2. Select [3D HIST.] with the arrow keys, then press the ENTER key.
3. Select [Terrain Shad.] with the arrow keys, then press the ENTER key.
4. Tap [Terrain Shad.]. Drag the slider bar which appears below menu or tap [+] or
[-] to adjust the value. (Setting range: 0 to 100)
5. Press the MENU/ESC key to close [Menu].
Setting: 0
4-30
Setting: 50 Setting: 100