How To Change The Trail Mode - Furuno SFD-1010 Operator's Manual

3. Select [Trail Erase] with the arrow keys, then press the ENTER key.
The [YES]/[NO] selection box appears.
4. Select [YES] or [NO] with the arrow keys, then press the ENTER key.
5. Press the MENU/ESC key to close [MENU].
2.18.3

How to change the trail mode

[True] trails and [Relative] trails are available in the echo trail mode.
True trails: True trails indicate the true movement of other ships relative to a landmass
irrespective of own ship's movement, which means that stationary targets are not
tracked.
True trails require heading and speed signals and position information.
Relative trails: Relative trails show other ships' movements relative to own ship. Since
the movement of own ship and other ships are synthesized, relative trails are effective
when you want to see the relative movements for avoiding collision, etc. Trails of
stationary targets are also shown.
Touch control:
1. Press the MENU/ESC key to open [MENU].
2. Tap [TRAILS].
3. Tap [Mode].
The [Relative]/[True] selection box appears.
4. Tap [Relative] or [True].
5. Tap [x] on the title bar to close [MENU].
Key control:
1. Press the MENU/ESC key to open [MENU].
2. Select [TRAILS] with the arrow keys, then press the ENTER key.
3. Select [Mode] with the arrow keys, then press the ENTER key.
The [Relative]/[True] selection box appears.
4. Select [Relative] or [True] with the arrow keys, then press the ENTER key.
5. Press the MENU/ESC key to close [MENU].
2. RADAR
2-29