Table of Contents
Advertisement
Manual adjustment
Touch control:
1.
Press the [ADJUST] key to open the [ADJUST] menu.
2.
Tap the [Sea] menu to open the [Manual]/[Auto] selection box.
3.
Tap [Manual].
4.
Drag the slider bar of the [Sea] menu or tap [+] or [-] to adjust the sea clutter level.
5.
Tap [x] on the title bar to close the [ADJUST] menu.
Key control:
1.
Press the [ADJUST] key to open the [ADJUST] menu.
2.
Select [Sea] with the arrow keys, then press the ENTER key.
The [Manual]/[Auto] selection box appears.
3.
Select [Manual] with the arrow keys, then press the ENTER key.
4.
Select the slider bar of the [Sea] menu with the arrow keys, then press the ENTER
key.
5.
Adjust the sea clutter level with the arrow keys, then press the ENTER key.
6.
Press the MENU/ESC key to close [ADJUST].
Note:
The procedures after step 3 are for when [Manual] is selected. When [Auto] is
selected, the sea clutter will be automatically adjusted and cannot be adjusted
with the slider bar.
Automatic adjustment
For automatic sea clutter suppression, there are two modes: [Advanced] and [Coastal].
Use [Advanced] under normal circumstances and use [Coastal] when reflections and
clutter are not sufficiently removed under [Advanced].
When set to [Coastal], the degree of sea clutter suppression is greater.
Select an automatic sea clutter suppression method with the following procedures.
Touch control:
1.
Press the MENU key to display menu.
2.
Tap [ECHO ADJ] menu.
3.
Tap [Auto SEA] menu.
[Advanced]/[Coastal] selection box appears.
2. RADAR
2-9
Advertisement
Table of Contents
Troubleshooting
