Installation; Mounting; Place Suitable For Mounting; Desktop Mount - Furuno SFD-1010 Operator's Manual

5. INSTALLATION

5.1

Mounting

5.1.1

Place suitable for mounting

When selecting a mounting location, keep the following in mind:
• The temperature at the mounting location shall be between -15°C and +55°C.
• The humidity at the mounting location shall be 93% or less (at 40°C).
• Locate the equipment away from exhaust pipes and exhaust ports.
• The mounting location shall be well ventilated.
• Mount the equipment where shock and vibration are minimal.
• Keep the equipment away from electromagnetic field generating equipment such
as motors and generators.
• Choose a location that allows easy access for maintenance and inspection. Leave
servicing space around the equipment, as shown in the outline drawing at the end
of this manual.
• Do not mount the equipment on the overhead.
• A magnetic compass will be affected if the equipment is placed too close to it.
Keep the compass safe distance shown in the Safety Instructions.
5.1.2

Desktop mount

1. Adjust the hanger width.
For landscape mounting, open the hanger to the maximum width.
For portrait mounting, close the hanger to the minimum width.
Landscape mounting
1. Loosen the fixing screws.
2. Adjust the hanger width.
3. Tighten the fixing screws.
Portrait mounting
5-1