11Internal/External Alarm; 12Alarm Audio Options - Furuno MFD12 Operator's Manual

5. Use the RotoKey to set a value. Rotate the key to select a value then push the
key to validate the setting.
6. Press the MENU key to close the menu.
2.10.11 Internal/External Alarm
The audio alarm is output from this equipment in the default setting. The alarm can be
output from this equipment, from external equipment or from both this equipment and
external equipment.
1. Press the MENU key to open the menu.
2. Open the [Alarms-General] menu.
3. Use the RotoKey to select and set [Alarm] to select how to output alarms.
[Internal]: Output the audio alarm from this equipment.
[External]: Output the audio alarm from external equipment.
[Internal/External]: Output the audio alarm from both this equipment and external
equipment.
[Off]: No alarm output.
4. Use the RotoKey to select [External Alarm Input]. Select the item to output when
you operate the SAVE/MOB key.
[OFF]: No output
[Save]*: The point saved with the SAVE/MOB key is output.
[MOB]*: The MOB point saved with the SAVE/MOB key is output.
* Do not select when [Alarm] is set for [External] or [Internal/External].
5. Press the MENU key to close the menu.
2.10.12 Alarm Audio Options
When an alarm setting is broken, the equipment releases audio and visual alarms in
the default condition. You can activate or deactivate the audio alarm or release the
alarm according to the speed of your vessel.
1. Press the MENU key to open the menu.
2. Open the [Alarms-General] menu.
3. Use the RotoKey to activate or deactivate the functions shown below.
[Speaker Alarm Output]: Activate or deactivate alarm output (from external
speaker).
[Speed-Based Output]: Activate or deactivate alarm output according to the
speed of your vessel.
[Speed-Based Output Value]: Set the speed at which alarms are output.
4. Press the MENU key to close the menu.
2. Chart Plotter
2-15