Multi Beam Fish Finder Display; How To Switch Between Single Beam And Triple Beam - Furuno SFD-1010 Operator's Manual

4.3

Multi Beam Fish Finder Display

This section covers the functions available with the multi beam fish finder display which
you access from the [SOUNDER] menu.
To show the [SOUNDER] menu, press the MENU/ESC key to open [MENU], then tap
[SOUNDER] menu. Or use the arrow keys to select [SOUNDER] menu, then press the
ENTER key.
4.3.1

How to switch between single beam and triple beam

Touch control:
1. Press the MENU/ESC key to open [Menu].
2. Tap [SOUNDER].
3. Tap [Beam Mode].
[Single]/[Triple] selection box appears.
4. Tap [Single] or [Triple].
Note: A-Scope is unavailable when [Triple] is selected.
5. Tap [×] on the title bar to close [MENU].
Key control:
1. Press the MENU/ESC key to open [Menu].
2. Select [SOUNDER] with the arrow keys, then press the ENTER key.
3. Select [Beam Mode] with the arrow keys, then press the ENTER key.
[Single]/[Triple] selection box appears.
4. Select [Single] or [Triple] with the arrow keys, then press the ENTER key.
Note: A-Scope is unavailable when [Triple] is selected.
5. Press the MENU/ESC key to close [Menu].
4. MULTI BEAM SONAR DFF-3D
4-11