Furuno SFD-1010 Operator's Manual page 186

5. INSTALLATION
2. Fix the hanger to the mounting location with the supplied self-tapping screws (M5×20, 4
pcs).
Landscape mounting
3. Put the equipment on a soft clean location with its screen facing downward. Then tighten
hanger knobs, leaving approximately 15 mm space on both sides.
Approx. 15 mm space
4. Set the display unit to the hanger and securely tighten the knobs.
Note: When mounting the display unit to the hanger, make sure that the display unit and
the hanger are precisely positioned at the connecting parts.
5-2
Knob
Portrait mounting
Approx. 15 mm space
Knob
Knob
Hanger
Knob
Hanger