How To Adjust The Brilliance From The External Equipment; How To Clear The Memory - Furuno MU-152 Operator's Manual

3.6.2

How to adjust the brilliance from the external equipment

When the FAR-15x3/15x8 is connected to the DVI-D1 or DVI-D2 port, or the FAR-1417/1427 or
FCV-1900 is connected to the USB port, you can adjust the display brilliance from the connected
equipment.
Note 1: This function is available when [AUTO DIMMER] on the [SYSTEM] menu is set to [OFF].
Note 2: The FAR-1417/1427 is for Japan only.
1. Press the MENU key to show the menu.
2. Press the key to select [SYSTEM].
3. Press the key to select [EXT BRILL CTRL].
4. Press the or
[OFF]: You can not adjust the brilliance from the external equipment.
[DVI1]: When the DVI1 is displayed, the brilliance signal from DVI-D1 port controls this dis-
play's brilliance. The
DVI1.
[DVI2]: When the DVI2 is displayed, the brilliance signal from DVI-D2 port controls this dis-
play's brilliance. The
DVI2.
[USB]: The brilliance signal from USB port controls this display's brilliance. The
key is not available.
5. Press the MENU key to close the menu.
3.6.3

How to clear the memory

You can clear the memory to restore the default settings.
1. Press the MENU key to show the menu.
2. Press the key to select [SYSTEM].
3. Press the key to select [DEFAULT RESET].
4. Press the key. The indication changes from [NO] to [YES].
Note: To cancel, press the
5. Press the key to select [reset].
key to set the desired input item.
/BRILL key is available for screens other than the screen input from
/BRILL key is available for screens other than the screen input from
RGB DVI1 DVI2 VIDEO1 VIDEO2 VIDEO3 OSD
AUTO DIMMER OFF
EXT BRILL CTRL OFF
DEFAULT RESET YES
All custom settings will be lost.
←key: cancel →key: reset
INFORMATION
RGB : 1280 * 1024
DVI1 : 640 * 480
DVI2 : NO SIGNAL
VIDEO1 : NTSC
VIDEO2 : PAL
VIDEO3 : NO SIGNAL
MODEL TYPE : MU-152
PROGRAM NO. : XX.XX
ELAPSED TIME : 100000 hour
key. The indication changes from [YES] to [NO].
SYSTEM
(OFF, 1~5)
(OFF/DVI1/DVI2/USB)
Fh : 80kHz Fv : 75Hz
Fh : 31kHz Fv : 60Hz
21
3. OPERATION
/BRILL