Table of Contents
Advertisement
2. RADAR
3.
Tap [Rings Brill].
The [Off]/[1]/[2]/[3]/[4] selection box appears.
4.
Tap [Off], [1], [2], [3] or [4].
5.
Tap [x] on the title bar to close [MENU].
Key control:
1.
Press the MENU/ESC key to open [MENU].
2.
Select [BRILL/COLOR] with the arrow keys, then press the ENTER key.
3.
Select [Rings Brill] with the arrow keys, then press the ENTER key. The
[Off]/[1]/[2]/[3]/[4] selection box appears.
4.
Select [Off], [1], [2], [3] or [4] with the arrow keys, then press the ENTER key.
5.
Press the MENU/ESC key to close [MENU].
Using the InstantAccess
1.
Tap [▶] on the left side of the screen to open the InstantAccess
[Rings Brill].
The ring brilliance changes in order of [Off] → [1] → [2] → [3] → [4]...
([Off]: Lowest brilliance. Darkest. [4]: Highest brilliance. Brightest.)
2-18
2-20
TM
Bar for noise rejection:
TM
Bar, then tap
Advertisement
Table of Contents
Troubleshooting
