Zoom; How To Change A Zoom Mode - Furuno SFD-1010 Operator's Manual

2. RADAR

2.17 Zoom

The zoom function can enlarge a part of the radar picture as large as twice the normal
viewing size.
2.17.1

How to change a zoom mode

You can select a zoom mode from three types, [Relative], [True] and [Target].
Relative: The set zoom cursor is fixed to the constant range and bearing from own ship.
True: The set zoom cursor is fixed to a lontitude/latitude of the cursor position.
Target: The set zoom cursor is fixed to a tracked target.
Touch control:
1. Press the MENU/ESC key to open [MENU].
2. Tap [OTHERS].
3. Tap [Zoom Reference].
The [Relative]/[True]/[Target] selection box appears.
4. Tap [Relative], [True] or [Target].
5. Tap [x] on the title bar to close [MENU].
Key control:
1. Press the MENU/ESC key to open [MENU].
2. Select [OTHERS] with the arrow keys, then press the ENTER key.
3. Select [Zoom Reference] with the arrow keys, then press the ENTER key.
The [Relative]/[True]/[Target] selection box appears.
4. Select [Relative], [True] or [Target] with the arrow keys, then press the ENTER key.
5. Press the MENU/ESC key to close [MENU].
2-26