How To Display The Tt Vector - Furuno SFD-1010 Operator's Manual

2. RADAR
2.24.7

How to display the TT vector

What is a vector?
A vector is a line extending from the center of a tracked target, and it shows the speed
and course of the target. The vector tip shows an estimated position of the target after
the selected vector time elapses. By extending the vector length, the risk of collision with
any target can be estimated. The vector color is the same as the symbol color of TT
targets.
How to set the vector time
1. Tap [▶] on the left side of the screen to open the InstantAccess
2. Tap [VECTOR TIME] on the InstantAccess
3. The time cycles through [1 min], [3 min], [6 min], [10 min], [15 min] and [30 min] with
each tap. Select a vector time.
4. Tap [◀] to close the InstantAccess
How to set vector reference
1. Tap [▶] on the left side of the screen to open the InstantAccess
2. Tap [VECTOR MODE] on the InstantAccess
3. The vector reference cycles through [True] and [Relative] with each tap. Select a
vector reference.
[True]:
[Relative]:
4. Tap [◀] to close the InstantAccess
2-50 2-44
TM
Indicates the true movement of own ship and other ship relative to a
landmass.
Use this mode to easily identify a moving target from a fixed target.
Indicates the movement of other ship relative to own ship.
This mode is suitable for determining dangerous targets for own
ship and for evaluating the risk of collision. The vector tip of a target
on a collision course is directed toward own ship.
TM
TM Bar.
Bar.
TM
Bar.
Bar.
TM Bar.
TM
Bar.