Mercedes-Benz EQS 350 Operator's Manual page 73

Table of Contents

Advertisement

70
Occupant safety
Overview of suitability of the seats for attaching
i‑Size child restraint systems
i‑Size is a standardised securing system for spe-
cially designed child restraint systems.
° The symbol indicates seats suitable for
attaching an i‑Size child restraint system in
accordance with UN R129 (
Child restraint systems that are permitted
in accordance with UN R44 as per the ISO-
FIX tables (
page 68) or UN R129 as per
/
the following i‑Size tables may be attached.
i‑Size child restraint systems (ISO/R2, ISO/F2X,
ISO/B2, ISO/B3)
Front passenger seat
Left/right rear seat
X
i‑U
X Not suitable for an i-Size child
i-U Suitable for forward-facing
restraint system in the "Univer-
and rearward-facing i-Size child
sal" category.
restraint systems in the "Univer-
sal" category.
Fitting the ISOFIX or i‑Size child restraint system
on the left and right rear seats
& WARNING Risk of accident if the rear
bench seat, rear seat and seat backrest
are not engaged
The rear bench seat, rear seat and seat back-
page 67).
/
rest may fold forwards, even while the vehicle
is in motion.
As a result, the vehicle occupant will be
R
pressed into the seat belt with increased
force. The seat belt will not be able to pro-
tect as intended and could cause addi-
tional injury.
Objects or loads in the boot or load com-
R
partment cannot be restrained by the seat
backrest.
Make sure that the rear bench seat, the
#
rear seat and the seat backrest are
engaged before every trip.
If the rear seat backrest is not engaged and
locked in place, the red lock verification indicator
will be visible.
& WARNING Risk of injury or death if the
permissible gross mass of the child and
child restraint system together is excee-
ded.
Too much load may be placed on the ISOFIX
or i‑Size child restraint systems and the child
may not be restrained correctly in the event of
an accident, for example.
If the child and the child restraint system
#
together weigh more than 33 kg, only
use an ISOFIX or i‑Size child restraint
system with which the child is secured
with the vehicle seat belt.
Also secure the child restraint system
#
with the Top Tether belt, if available.
Always comply with the information about the
mass of the child restraint system:
in the manufacturer's installation and operat-
R
ing instructions for the child restraint system
used
on a label on the child restraint system, if
R
present

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eqs 450 4maticEqs 500 4maticEqs 450+Eqs 580 4matic

Table of Contents