Mercedes-Benz EQS 350 Operator's Manual page 277

Table of Contents

Advertisement

274 Driving and parking
flashes three times in the driver's display) or vis-
ual and acoustic, including a warning tone.
Additional functions of Traffic Sign Assist (coun-
try-specific)
Warning for no-entry signs: Traffic Sign Assist can
warn you if you drive the wrong way down a sec-
tion of road, forexample on motorway slip roads
or one-way streets.
Warning at pedestrian crossings: if you approach
pedestrian crossings, provided that pedestrians
are in the danger zone or are moving towards it,
Traffic Sign Assist can warn you up to a speed of
approximately 70 km/h.
Warning at stop signs: Traffic Sign Assist can warn
you up to a speed of approximately 70 km/h if
you are about to drive past a stop sign uninten-
tionally. For this to be possible, the signs must be
clear, forexample if the system detects more than
one stop sign, or a stop sign can be confirmed
using the digital navigation map. No warning can
be issued if several different signs are detected.
Warning at red lights: Traffic Sign Assist can warn
you up to a speed of approximately 70 km/h if
you are about to drive through a red light uninten-
tionally.
The following conditions must be fulfilled:
Several traffic lights have been detected.
R
All traffic lights detected are red.
R
At least one of the red traffic lights detected is
R
on the front passenger side beside the vehi-
cle's own lane.
The traffic lights are in the following sequence
R
(from top to bottom): red, yellow, green.
%
If the function is available, you can activate or
deactivate the warnings at pedestrian cross-
ings, stop signs and red lights in the Traffic
Sign Assist menu under
Further warnings
(
page 275).
/
System limits
The system may be impaired or may not function
particularly in the following situations:
If visibility is poor, e.g. due to insufficient illu-
R
mination of the road, highly variable shade
conditions, rain, snow, fog, swirling dust or
heavy spray.
If there is glare, e.g. from oncoming traffic,
R
direct sunlight or reflections.
If there is dirt on the windscreen in the vicinity
R
of the multifunction camera or if the camera is
misted up, damaged or obscured.
If traffic signs are difficult to detect, e.g.
R
because they are dirty, covered, faded, cov-
ered with ice, damaged, badly positioned,
poorly lit or twisted.
Active traffic signs with LED displays may not
R
be detected correctly or at all due to technical
factors, suchas transmission frequency.
If the information on the navigation system's
R
digital map is incorrect, incomplete or out of
date.
If signs or the road layout is ambiguous, e.g.
R
traffic signs in roadworks, at exits and ramps,
in neighbouring lanes or parallel roads.
If signs do not conform to the standard.
R
If signs or road layouts are specific to the
R
country and deviate from the route guidance
in the navigation system, e.g. at or beyond
construction sites.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eqs 450 4maticEqs 500 4maticEqs 450+Eqs 580 4matic

Table of Contents