Mercedes-Benz EQS 350 Operator's Manual page 268

The system does not detect a suitable road,
R
forexample, in tight bends or shortly after a
slip road.
The vehicle is on a construction site.
R
%
The Active Lane Change Assist sensors adjust
automatically while a certain distance is being
driven after the vehicle has been delivered.
Active Lane Change Assist is unavailable or
only partially available during this teach-in
process, and no arrows are displayed next to
the Ø Active Steering Assist symbol.
Observe the notes on driving systems and your
responsibility; you may otherwise fail to recognise
dangers ( page 237).
/
Selecting Active Lane Change Assist
Multimedia system:
© Settings Assistance
4 5 5
Driving
5
Active Lane Change
Select
#
Active Brake Assist
Function of Active Brake Assist
Active Brake Assist consists of the following func-
tions:
Distance warning function
R
Collision warning
R
Autonomous braking function
R
Situation-dependent braking assistance
R
Vehicles with Driving Assistance Package and
R
Active Steering Assist: Evasive Steering Assist
Active Brake Assist can help you to minimise the
risk of a collision with vehicles, cyclists or pedes-
trians or to reduce the effects of such a collision.
If Active Brake Assist has detected a risk of colli-
sion, a warning tone sounds and the L dis-
tance warning lamp lights up.
Assist.
Driving and parking 265
In the Assistance menu, an insufficient distance
1 to the vehicle in front is displayed in red. If you
further reduce the distance, the vehicle in front is
also highlighted in red. When the system detects a
risk of collision, red radar waves
front of the vehicle.
%
®
Vehicles with PRE-SAFE : depending on the
country, an additional haptic warning occurs
in the form of slight, repeated tensioning of
the seat belt.
%
Vehicles with active ambient lighting: if
ing assistance is activated, the Active Brake
Assist warning is also accompanied by ambi-
ent lighting ( page 169).
/
2
appear in
Warn-