Mercedes-Benz EQS 350 Operator's Manual page 443

440 Wheels and tyres
Do not start the vehicle and do not release the
R
electric parking brake.
Do not open or close any doors or the tailgate.
R
Using the wheel wrench, loosen the wheel
#
bolts on the wheel you wish to change by
about one full turn. Do not unscrew the
screws completely.
Position of the jack support points
* NOTE Mercedes-AMG vehicles
Observe the notes in the Supplement.
#
You could otherwise fail to recognise
dangers.
& WARNING Risk of injury from incorrect
positioning of the jack
If you do not position the jack correctly at the
appropriate jacking point of the vehicle, the
jack could tip with the vehicle raised.
Only position the jack at the appropriate
#
jacking point of the vehicle. The base of
the jack must be positioned vertically
under the jacking point of the vehicle.
* NOTE Damage to the vehicle due to using
an unsuitable jack
You can damage the vehicle and, in particular,
the high-voltage battery if you use a jack that
is not specifically designed for the jack sup-
port points of the vehicle.
Only use jacks that are specifically
#
designed for the jack support points, or
use an appropriate adapter.
* NOTE Risk of damage to the vehicle due
to incorrect positioning of the jack
If you do not position the jack at the designa-
ted jack support points, you could damage
your vehicle and, in particular, the high-voltage
battery.
Only position the jack at the designated
#
jack support points.