Mercedes-Benz EQS 350 Operator's Manual page 222

Example: Combo 2 vehicle socket
The colour and signalling of status display
have the following meanings:
Locking status
Lights up white: vehicle socket unlocked;
R
insert or remove charging cable
Flashes white: disconnection or malfunction
R
during locking or unlocking
Charge status
Lights up blue: charging process completed
R
Flashes blue: charging; active energy flow
R
Lights up orange: charging paused
R
Flashes orange: connection is being estab-
R
lished
Flashes red (for approx. 90s): malfunction in
R
vehicle; charging not possible
%
Vehicles with active ambient lighting: when
the charging sequence is activated, the
charge level is also accompanied by ambient
lighting ( page 169).
/
Starting the alternating current charging process
(mode 2/3)
1
& DANGER Risk of death when charging at a
damaged socket
The charging process uses high voltage.
If the charging cable, the vehicle socket or the
mains socket are damaged, you could receive
an electric shock.
Driving and parking 219
Only use an undamaged charging cable.
#
Avoid mechanical damage such as crush-
#
ing, abrading or driving over the cable.
Have a damaged vehicle socket replaced
#
at a qualified specialist workshop as
soon as possible.
Never connect the charging cable to a
#
damaged vehicle socket.
* NOTE Damage due to overheating of
charging cable and charging cable con-
nector
During the charging process, the charging
cable and charging cable connector can heat
up within their permissible limit values.
The permissible limit values are influenced by
the following factors:
the power supply system and the charging
R
cable are not damaged
the instructions for handling the charging
R
cable and the control element on the
charging cable have been observed