Mercedes-Benz EQS 350 Operator's Manual page 125

122 Seats and stowing
To set the centre head restraint in the first
#
position: pull the head restraint up until it
engages.
To raise: push release knob
#
tion of the arrow and pull the head restraint up
until it engages.
To lower: press release knob
#
tion of the arrow and push the head restraint
down until it engages.
Fitting/removing the rear seat head restraints
(standard seats)
Removing
1
in the direc-
Release the rear seat backrest and fold it for-
#
wards slightly (
Press release knob
1 in the direc-
#
restraint upwards as far as it will go.
Release knob
page 138).
/
2 and pull the head
1 will extend.
Push both release knobs 1
#
same time in the direction of the arrow and
pull out the head restraint.
Fold the rear seat backrest back until it
#
engages.
Installing
Release the rear seat backrest and fold it for-
#
wards slightly ( page 138).
/
Insert the head restraint such that the notches
#
on the bar are on the left when viewed in the
direction of travel.
Push the head restraint down until it engages.
#
Fold the rear seat backrest back until it
#
engages.
and 2 at the