Mercedes-Benz EQS 350 Operator's Manual page 171

Table of Contents

Advertisement

168 Light and sight
If other road users are detected, partial high
R
beam will switch on automatically.
If highly reflective signs are detected, ULTRA
R
RANGE Highbeam will be switched off auto-
matically.
%
The system's optical sensor is located behind
the windscreen near the overhead control
panel.
Switching Adaptive Highbeam Assist Plus on/off
Switching on
Turn the light switch to the à position.
#
Switch on high beam using the combination
#
switch.
If Adaptive Highbeam Assist Plus is activated,
the _ indicator lamp will light up on the
driver's display. When partial high beam or
high beam is active, the corresponding blue
indicator lamp will also light up.
Switching off
Switch off high beam using the combination
#
switch.
Setting low beam
Multimedia system:
©
Settings
Lights
4
5
5
DIGITAL LIGHT
Low beam
5
5
Select
Right-side
traffic,
Left-side traffic
#
Automatic.
Setting the exterior lighting switch-off delay time
Multimedia system:
©
Settings
Lights
4
5
5
Interior/exterior lighting
5
Exterior lighting delayed switch off
5
Set the switch-off delay time.
#
When the vehicle's engine is switched off, the
exterior lighting will be activated for the set
time.
Activating/deactivating the locator lighting
Multimedia system:
©
Settings
4
5
Interior/exterior lighting
5
Activate or deactivate
or
#
When the function is activated, the exterior light-
ing will light up for 40 seconds after the vehicle is
unlocked or the driver's door is opened when the
vehicle is parked and not locked. When you start
the vehicle, the locator lighting will be deactivated
and the automatic driving lights activated.
Lights
5
Locator
lighting.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eqs 450 4maticEqs 500 4maticEqs 450+Eqs 580 4matic

Table of Contents