Mercedes-Benz EQS 350 Operator's Manual page 287

284 Driving and parking
When the trailer socket is contacted (trailer/
R
bicycle rack): the vehicle is moving faster than
30 km/h.
GPS-based raising
If the function is activated, it is possible to save
the vehicle position when the vehicle level is
raised.
Confirm the prompt.
#
The position of the vehicle is stored. When the
previously stored position is reached again, a
prompt appears in the Zero Layer as to
whether the vehicle level should be raised
again.
%
Settings for GPS-based raising (
%
Function of the zero layer (
/
Lowering the vehicle
Select t.
#
The indicator lamp goes out.
The vehicle is adjusted to the normal level.
%
Use the normal level in trailer operation. High
level driving is not permitted in trailer opera-
tion on public roads.
Setting GPS-based raising of the vehicle
Multimedia system:
©
4
GPS-based raising
5
Select Positions saved on
#
save positions
Reversing camera
Function of the reversing camera
The reversing camera monitors the area behind
your vehicle. If you have activated the function
( page 291), the image from the reversing cam-
/
era is automatically displayed in the central dis-
page 284)
/
play when reverse gear is engaged.
page 329)
The reversing camera is only an aid. It is not a
substitute for your attention to the surroundings.
The responsibility for safe manoeuvring and park-
ing remains with you. Make sure that there are no
persons, animals or objects etc., in the manoeu-
vring area while manoeuvring and parking.
%
The area behind the vehicle is displayed as a
mirror image, as in the inside rear view mirror.
Settings Vehicle Driving
5 5 5
request, Always
or Delete all saved positions.
Camera views menu (top view)
1 Parking Assistance menu
2
Reversing camera with top view
3
Wide-angle view
4 Trailer view
5 Activates/deactivates Parking Assist
PARKTRONIC ( page 295)
/